VIO Video Servers

Get your Cablecast VIO4+ server up and running with step-by-step guidance on physical connections, Windows setup, and audio configuration.

Get your Cablecast VIO4 server up and running with step-by-step guidance on physical connections, Windows setup, and audio configuration.

Everything you need to get your VIOLite 600/700 Series server physically connected and ready to configure.

A step-by-step setup guide for the Cablecast VIO 2 server, covering physical connections, AV configuration, Windows setup, and links to audio and software configuration resources.

Learn how to configure mirrored outputs in Cablecast to replicate automation switch commands across multiple outputs — no external hardware required.

Keep your audio levels consistent across your programming. This guide covers how to configure audio normalization, target loudness, and volume adjustment for your Cablecast playback devices and Cablecast CG Background Audio.

If your Cablecast server has more than one network interface card (NIC) in use, you'll need to specify which IP address Cablecast should use. Learn how to set a bind address by editing the ControlModuleSettings.config file and restarting the Cablecast Device Control service to apply the change.

VIO2 Omni Setup Guide

Best Practices For System Security

Running TRMS Broadcast Products as Active Directory Domain Members is not Supported

You can configure your VIO server outputs to also be NDI sources. This guide shows how to enable NDI output.

Setting up a Cablecast server begins with the initial Windows out-of-box setup experience. This is a guide to that process.

Cablecast 7.6 introduced a change to where the Video Server Output Resolution/Playback Resolution is added and updated within Cablecast. This article includes step by step instructions on setting the output resolution for your Cablecast system.

This article covers information you should know about using backup software, antivirus or other 3rd party applications on your Cablecast system.

VIOStream Setup guide

Audio normalization and processing setup for Cablecast systems running version 7.3 - 7.5

Setup guide for Network share of video files in Cablecast 7.4 or lower

Guide to find the protocol defined in the URL of your share will tell the MacOS what version of SMB to use.

Protection guide from Spectre and Meldown

Information on using Utah Scientific 100x and 100/UDS-10 routers with the UtahScientificRCP1 Control Module

New User information for Cablecast systems

Guide for finding the IP address of your Cablecast servers

Commissioning Guide. Exporting Carousel Bulletin Channel to be used in CablecastCG

Tips for setting up remote access to your Cablecast system

Quick guide for finding which OS your servers are running

Cablecast CG has the ability to run in L-Bar mode. This change will keep Cablecast CG running around your scheduled videos. Requires Cablecast CG to be playing from the same video player as your schedule. Note: L-Bar is not the same as SqueezeBack. Once a system is setup for L-Bar it stays that way.

Enabling the Firewall within windows

Best practices in system maintence is to keep your windows OS up-to-date with the latest windows updates.

Hairpinning or NAT Loopbacks

Link to Wordpress plugin for Cablecast API pulls

List of recommended Routing Switches for use with Cablecast

Migrating bulletin files and channels from Carousel to CablecastCG

DOA